| 1,058 | 5 | 21 |
| 下载次数 | 被引频次 | 阅读次数 |
多孔氮化硅陶瓷具有优异的抗氧化、抗热震、低介电常数和介电损耗、高孔隙率、优良的机械力学和耐酸碱腐蚀等性能,备受国内研究者的青睐。分析多孔氮化硅陶瓷的制备方法和应用领域的研究进展,展望了多孔氮化硅陶瓷的研究方向。
Abstract：Porous silicon nitride ceramics have excellent thermal shock resistance,low dielectric constant and dielectric loss,high porosity,good mechanical properties,as well as corrosion resistance,etc.It has gained the appreciation of domestic and foreign researchers.The synthesis methods and the applications of porous silicon nitride were summarized.Finally,the developing trends are forecasted.
[1]Gulsum T,Uwe P,Joerg A,et al.Production and permeability of porous Si3N4 ceramics produced by starch addition[J].Journal of Asian Ceramic Societies,2013,1(03):257-261.
[2]于方丽,白宇,杜军,王欢锐,杨建锋.多孔氮化硅陶瓷的微观结构、力学性能和气体透气性的研究[J].人工晶体学报,2012,41(03):656-660.
[3]刘甜甜.稻壳制备高性能硅质多孔陶瓷的研究[D].淮南:安徽理工大学,2017:25-33.
[4]许晓敏,刘甜甜,郭伟.不同碳硅比稻壳对原位制备多孔Si3N4陶瓷的影响[J].人工晶体学报,2015,44(09):2484-2489.
[5]Wang HJ,Yu JL,Zhan J,et.al.Preparation and properties of pressureless-sintered porous Si3N4[J].Journal of Materials Science,2010,45(13):3671-3676.
[6]Kossowsky R.The microstructure of hot-pressed silicon nitride[J].Journal of Materials Science,1973,8(11):1603-1615.
[7]Yang JF,Ohji T,Kanzaki S,et al.Microstructure and mechanical properties of silicon nitride ceramics with controlled porosity[J].Journal of the American Ceramic Society,2002,85(06):1512-1516.
[8]Kovalckov A,Balko J,Bal zsi C,et al.Influence of h BN content on mechanical and tribological properties of Si3N4/BN ceramic composites[J].Journal of the European Ceramic Society,2014,34(14):3319-3328.
[9]Kondo N,Suzuki Y,Ohji T.High-strength porous silicon nitride fabricatedby the sinter-forging technique[J].Journal of Materials Research,2001,16(01):32-34.
[10]Plucknett KP,Quinlan M,Garrido L,et al.Microstructural development in porousβ-Si3N4 ceramics prepared with low volume RE2O3-Mg O-(Ca O)additions(RE=La,Nd,Y,Yb)[J].Materials Science and Engineering A,2008,489(1-2):337-350.
[11]Shigegaki Y,Brito ME,Hirao K,et al.Strain Tolerant Porous Silicon Nitride[J].Journal of the American Ceramic Society,1997,80(02):495-498.
[12]Zeng YP,Yang JF,Kondo N,et al.Fracture energies of tape cast silicon nitride withβ-Si3N4 seed addition[J].Journal of the American Ceramic Society,2005,88(06):1622-1624.
[13]Omalete OO,Janney MA,Strehlow RA.Gelcasting:A new ceramic formingprocess[J].American Ceramic Society Bulletin,1991,70(10):1641-1649.
[14]张雯,王红洁,张勇,金志浩.凝胶注模工艺制备高强度多孔氮化硅陶瓷[J].无机材料学报,2004(04):743-748.
[15]王鹏举,吴玉萍,应国兵,田宝娜,王乘,李嘉,赵海伟.凝胶注模技术制备高强度多孔氮化硅陶瓷[J].硅酸盐学报,2014,42(12):1496-1500.
[16]Cano IG,Borovinskaya IP,Rodriguez MA,et al.Effect of dilution and porosity on self-propagating high-temperature synthesis of silicon nitride[J].Journal of the American Ceramic Society,2002,85(09):2209-2211.
[17]Fukasawa T,Deng ZY,Ando M,et al.Synthesis of porous silicon nitride with unidirectionally aligned channels using freeze-drying process[J].Journal of the American Ceramic Society,2002,85(09):2151-2155.
[18]Ye F,Zhang J,Liu L,et al.Effect of solid content on pore structure and mechanical properties of porous silicon nitride ceramics produced by freeze casting[J].Materials Science and Engineering:A,2011,528(03):1421-1424.
[19]鲁元,杨建锋,李京龙.碳热还原-反应烧结法制备多孔氮化硅陶瓷[J].无机材料学报,2013,28(05):469-473.
[20]罗民,程佳,马晶,陈小虎,王斌鉴,杨建锋.仿生制备多孔氮化硅陶瓷[J].无机材料学报,2008(04):763-768.
[21]Yin L,Zhou X,Yu J,et al.Preparation of silicon nitride foam with three-dimensional interconnected pore structure[J].Materials and Design,2016,89(01):620-625.
[22]邓健,姚冬旭,夏咏锋,左开慧,尹金伟,曾宇平.注浆成型结合真空发泡法制备梯度多孔氮化硅陶瓷[J].无机材料学报,2016,31(08):865-868.
[23]门薇薇,轩立新,袁中毅,张明习.低介电常数多孔氮化硅陶瓷的制备[J].材料导报,2012,26(12):118-121.
[24]Bodisora K,Kasiarova M,Domanicka,M,et al.Porous silicon nitride ceramics designed for bone substitute applications[J].Ceramics International,2013,39(07):8355-8362.
[25]Hnatko M,Zoltan L,Peter O,et al.Synthesis,characterizations and in vitro assessment of the cytotoxicity and genotoxicity of novel silicon nitride-based porous ceramics[J].Materials Sciences and Applications,2013,04(07):407-418.
基本信息:
DOI：10.16825/j.cnki.cn13-1400/tb.2019.04.004
中图分类号:TQ174.1
引用信息:
[1]杨永红,张冬梅,马其坤.氮化硅基多孔陶瓷的制备与应用进展[J].工业技术与职业教育,2019,17(04):9-12.DOI:10.16825/j.cnki.cn13-1400/tb.2019.04.004.
基金信息:
唐山市科技计划项目“生物质基高性能多孔氮化硅陶瓷的制备及性能研究”（项目编号：17130215a），主持人杨永红